Key takeaways
- Review of the Anker SOLIX PS100 Bifacial 100W panel, 6.2 lb and IP68, compared with five verified 100W portable solar panels for camping and backup use.
Short answer: The Anker SOLIX PS100 Bifacial is the lightest 100W bifacial panel in this comparison on paper, at 6.2 lb, with IP68 protection, N-type bifacial cells listed at 25% or higher efficiency, and a 5-year warranty. It is also the only current Anker panel that fits the SOLIX C300 and C300 DC, whose 11 to 28V solar input rules out the larger Anker panels. One limit applies here: no standalone ASIN for the PS100 Bifacial was found in an Amazon search result, so it is not listed as a buyable pick below. The verified bifacial pick that leads this roundup is the Jackery SolarSaga 100W Bifacial.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- The Anker PS100 Bifacial
- How to Compare
- Quick Comparison
- 1. Jackery SolarSaga 100W
- 2. Renogy 100W N-Type
- 3. FlexSolar 100W
- 4. BLUETTI PV120 120W
- 5. EcoFlow 110W
- Which Panel for Which Station
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
The Anker PS100 Bifacial, Reviewed
The PS100 Bifacial is a 100W foldable panel with N-type bifacial monocrystalline cells, listed at 25% or higher efficiency. Its output is listed at 21.6V and 4.63A, with an open-circuit voltage of 25.9V and a short-circuit current of 4.86A. It weighs 6.2 lb, folds to 20.1 x 23.6 x 2.5 in, and opens to 40.6 x 23.6 x 0.7 in. It is rated IP68, with a 5-year warranty. The box includes two 8.2 ft solar cables and a 1.6 ft XT60i cable, with MC4 connectors.
The bifacial design collects light from the rear face as well as the front. Anker states that the rear side can add up to 10% more power in reflective environments, such as snow, sand, or concrete. On grass, that gain is small, so plan on the front rating and treat any rear-face gain as extra. The 25.9V open-circuit voltage sits inside the solar input window of every Anker SOLIX station in the compatibility table used for this review, which is why this panel is the default Anker choice for a small station.
Do not confuse this panel with the original PS100. The original was a single-sided panel, rated IP67, at 9.7 lb, and Amazon listed it as currently unavailable on November 8, 2026. It is not a pick in this article. The C1000 plus PS100 Bifacial bundle, ASIN B0CDGLKF3D, appears in a tracker that names amazon.com as the store, but it did not appear in an Amazon search result, so it is not used as a pick here either.
How to Compare 100W Panels
A 100W rating is a maximum in full, direct sun, not a promise for a whole day. Compare the cell type, the connector, the voltage, the weight, and the water rating together, because two panels can share a 100W rating and still suit different stations. A panel with a USB output can charge a phone directly. A panel with only an MC4 output feeds a station, not a phone. A panel with an open-circuit voltage above a station limit must not be used with that station, even if the wattage is lower than the station limit.
Quick Comparison
| Panel | Wattage | Cell type | Main outputs | Tier |
|---|---|---|---|---|
| Jackery SolarSaga 100W Bifacial | 100W | Bifacial monocrystalline | USB-A, USB-C, DC8020, DC7909 | Mid-range |
| Renogy 100W N-Type Portable | 100W | N-type monocrystalline | USB-C, USB-A, MC4 | Budget |
| FlexSolar 100W | 100W | Monocrystalline | USB-C, USB-A, DC | Budget |
| BLUETTI PV120 | 120W | Monocrystalline | MC4 | Premium |
| EF ECOFLOW 110W | 110W | Monocrystalline | MC4, Solar to XT60 | Mid-range |
1. Jackery SolarSaga 100W Bifacial
This is the verified bifacial pick in this roundup, and the closest match to the Anker PS100 Bifacial. It is a 100W bifacial monocrystalline panel, with a cell efficiency of 25% in the Amazon listing table. The model number is JS-100F. Outputs include USB-A and USB-C, plus DC8020 and DC7909 adapters for a station, so it can charge a phone directly and feed a Jackery Explorer station. The title lists compatibility with Jackery Explorer 240, 300, 500, 1000, and 1500 stations. Weight and water rating figures differ across the listing excerpts checked, so check the current listing for both.
Specs
| Spec | Detail |
|---|---|
| Wattage | 100W, bifacial |
| Cell type | Bifacial monocrystalline; 25% cell efficiency in listing table |
| Outputs | USB-A, USB-C, DC8020, DC7909 adapter |
| Compatibility | Jackery Explorer 240, 300, 500, 1000, 1500, per title |
| Weight and water resistance | Figures differ across listing excerpts; check the current listing |
| Model | JS-100F |
| Tier | Mid-range |
2. Renogy 100W N-Type Portable Solar Panel
This is the USB-friendly alternative to the Jackery panel. It is a 100W N-type monocrystalline panel, with 16BB cells listed at 25% efficiency. The model number is RPP100EF-SE. It charges three devices at once, with one USB-C PD port at 45W maximum and two USB-A ports at 18W and 15W, plus an MC4 output for a power station or a 12V battery system. It folds to 20.6 x 24.6 x 1.6 in at 8.86 lb, with kickstands and an ETFE surface, and it is listed at IP67.
Specs
| Spec | Detail |
|---|---|
| Wattage | 100W |
| Cell type | N-type monocrystalline, 16BB; 25% efficiency listed |
| Outputs | USB-C PD 45W max, 2x USB-A 18W and 15W, MC4 |
| Weight and size | 8.86 lb; folded 20.6 x 24.6 x 1.6 in |
| Water resistance | IP67 listed |
| Model | RPP100EF-SE |
| Tier | Budget |
3. FlexSolar 100W Portable Solar Panel
This is the lightest panel in this roundup, and the best choice when carry weight matters most. It is a 100W monocrystalline panel, with 24% efficiency listed in the Amazon title. The model number is lx-S100. Outputs include a 100W DC output, a 45W USB-C PD 3.0 port, and an 18W USB-A QC3.0 port, plus a four-connector cable covering DC5521, DC7909, Anderson, and XT60. It folds to 12.99 x 10.43 x 2.17 in at 4.1 lb, and it is listed at IP67.
Specs
| Spec | Detail |
|---|---|
| Wattage | 100W |
| Cell type | Monocrystalline; 24% efficiency listed in Amazon title |
| Outputs | DC 100W, USB-C PD 45W, USB-A 18W; 4-in-1 cable DC5521, DC7909, Anderson, XT60 |
| Weight and size | 4.1 lb; folded 12.99 x 10.43 x 2.17 in |
| Water resistance | IP67 listed |
| Model | lx-S100 |
| Tier | Budget |
4. BLUETTI PV120 120W Portable Solar Panel
This is the higher-output alternative, at 120W rather than 100W. It is a monocrystalline panel, with cells listed at up to 23.4% efficiency. Its electrical figures are a maximum power voltage of 19.6V at 6.1A, and an open-circuit voltage of 24.4V at a short-circuit current of 6.43A. It connects through an MC4 connector, with a solar connector and cable included, and it has no USB output stated, so it feeds a station, not a phone directly. It is listed for BLUETTI EB3A, AC2A, AC50B, AC70, AC180, AC200L, Elite 200 V2, AC300, and B300K stations.
Specs
| Spec | Detail |
|---|---|
| Wattage | 120W |
| Cell type | Monocrystalline; up to 23.4% efficiency listed |
| Outputs | MC4 connector; solar connector and cable included; no USB output stated |
| Electrical figures | Vmp 19.6V / 6.1A; Voc 24.4V; Isc 6.43A |
| Weight | Not stated consistently in the sources checked; check the current listing |
| Water resistance | IP67 listed in Amazon title |
| Tier | Premium |
5. EF ECOFLOW 110W Portable Solar Panel
This is the panel to check first for an EcoFlow station. It is a 110W monocrystalline panel, listed at 23% efficiency, with a model number of EF-Flex-110C. It connects through an MC4-compatible solar connector, with a Solar to XT60 charging cable included, and no USB output is stated. It is listed for EcoFlow DELTA and RIVER series stations, and for most generators with a solar connector. It folds to 20.2 x 16.5 x 0.8 in at 8.8 lb, unfolds to 20.2 x 62.5 x 0.8 in, and is listed at IP68.
Specs
| Spec | Detail |
|---|---|
| Wattage | 110W |
| Cell type | Monocrystalline silicon; 23% efficiency listed |
| Outputs | MC4-compatible solar connector; Solar to XT60 cable included; no USB output stated |
| Weight and size | 8.8 lb; folded 20.2 x 16.5 x 0.8 in; unfolded 20.2 x 62.5 x 0.8 in |
| Water resistance | IP68 listed |
| Model | EF-Flex-110C |
| Tier | Mid-range |
Which Panel for Which Station
For an Anker SOLIX C300 or C300 DC, the PS100 Bifacial is the Anker panel that fits, because its 25.9V open-circuit voltage sits inside the 11 to 28V input window. For a Jackery Explorer station, the Jackery SolarSaga 100W Bifacial is the matched pick. For a station that needs USB charging as well as MC4, the Renogy and FlexSolar panels are the flexible choices, with the FlexSolar panel winning on weight and the Renogy panel winning on USB-C output. For an EcoFlow DELTA or RIVER station, the EcoFlow 110W panel is the matched pick. For a BLUETTI station, or a larger station that can use 120W, the BLUETTI PV120 is the matched pick.
Frequently Asked Questions
Is the Anker SOLIX PS100 Bifacial worth it over the original PS100?
On the published specs, yes, for a buyer who can buy it as a standalone panel. It is lighter, at 6.2 lb against 9.7 lb for the original, it is rated IP68 against IP67, and it uses N-type bifacial cells listed at 25% or higher efficiency. It is also the only current Anker panel that fits the C300 and C300 DC. The original PS100 was reported unavailable on Amazon on November 8, 2026.
Can a 100W panel charge a phone directly?
Only if the panel has a USB output. The Jackery, Renogy, and FlexSolar panels in this roundup have USB-A and USB-C outputs, so they can charge a phone directly. The BLUETTI PV120 and the EcoFlow 110W panels have no USB output stated, so they feed a power station, not a phone directly.
What does bifacial mean in practice?
A bifacial panel collects light from its rear face as well as its front face. Anker states that the PS100 Bifacial can add up to 10% more power in reflective environments, such as snow, sand, or concrete. On grass, the gain is small. Plan on the front rating, and treat any rear-face gain as extra.
How do I know if a panel fits my power station?
Check the station manual for the solar input voltage range, the maximum wattage, and the connector type, then check the panel listing for the same three facts. A panel with an open-circuit voltage above the station limit must not be used with that station, even if the wattage is lower than the station limit.
Conclusion
The Anker SOLIX PS100 Bifacial is the lightest 100W bifacial panel here on its published specs, at 6.2 lb, with IP68 protection, N-type bifacial cells, and a 5-year warranty. It is the right Anker panel for a C300 or C300 DC, and a strong panel for any small Anker SOLIX station. Because no standalone ASIN for it was found in an Amazon search result, the verified bifacial pick in this roundup is the Jackery SolarSaga 100W Bifacial. The Renogy and FlexSolar panels are the flexible USB choices, the EcoFlow 110W panel is the matched EcoFlow choice, and the BLUETTI PV120 is the higher-output choice. Match the panel to the station connector and voltage first, then to weight and water rating.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!