Updated Nov 19, 2026· 8 min read

Key takeaways

  • Compare the best smart plugs for cutting standby power, with energy monitoring picks from Kasa, Emporia, and Govee plus an honest scheduling-only option.

Many home electronics keep drawing power after they are switched off. Chargers, televisions, game consoles, printers, and media boxes sip electricity around the clock in standby mode, and that quiet draw is easy to forget because nothing appears to be running. A smart plug attacks the problem at the outlet: it can show what a device is actually drawing, and it can cut power completely on a schedule instead of leaving the device in standby all night.

The useful method has two steps. First, measure: an energy-monitoring plug reveals which devices draw meaningful power at rest and which barely draw anything. Second, act only where the numbers justify it, by scheduling or switching off the loads that waste power while nobody uses them. The four monitoring plugs below support both steps, and the fifth pick is an honest scheduling-only option for loads whose draw is already known.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

Start with a monitoring plug: it shows what a device draws at rest, so you can see which loads are worth switching off. Pick a 15A model for heavy loads, note the Emporia’s 10A continuous rating, and use scheduling-only plugs only where the draw is already known.

Kasa Smart Plug with Energy Monitoring, EP25, 4-Pack

Check price on Amazon

Check price on Amazon

The Kasa EP25 is the measure-first pick in a four-pack, which suits a home where several entertainment or office devices need checking one by one. Its energy monitoring shows real-time and historical use in the Kasa app, so a reader can leave it behind a television or console for a few days, read what standby actually costs that device in draw, and then decide whether a schedule is worthwhile.

One caution keeps expectations realistic: the EP25 ships in several hardware versions, and the detail of the energy graphs differs between versions. Describe the monitoring in general terms, as real-time and historical readings in the app, rather than counting on one specific graph or cost display. Beyond monitoring, it works as a normal smart plug with app control and scheduling for the loads that do earn a cutoff routine.

Spec Detail
Function Smart plug with energy monitoring
Energy data Real-time and historical use in the Kasa app
Pack size 4 pack, EP25P4
Model EP25
Load rating Not stated
ASIN B0B14C719T

Kasa Smart Plug, KP125M, Matter Compatible, 2-Pack

The KP125M adds Matter compatibility to Kasa energy monitoring, in a compact two-pack rated at 15A and 1800W maximum. It works with Apple Home, Alexa, and Google Home, is UL Certified, and connects over 2.4G Wi-Fi only. For a mixed-platform household, that combination makes it the flexible pick for a heavy entertainment stack or a home office corner.

The platform caution matters here. Energy readings are viewed in the Kasa or Tapo app, and Matter energy reporting is platform-dependent: TP-Link’s own ecosystem information marks Apple Home as on/off control only for this plug. So the plug does measure, but not every smart-home app will display the energy data. Buyers who mainly live in the Kasa or Tapo app get the full picture; buyers expecting readings inside every platform should check that expectation before ordering.

Spec Detail
Function Smart plug with energy monitoring
Rating 15A, 1800W max
Platforms Apple Home, Alexa, Google Home, Matter
Energy data Kasa or Tapo app; Matter energy reporting is platform-dependent
Wi-Fi 2.4G Wi-Fi only
Certification UL Certified
Pack size 2 pack, KP125MP2
ASIN B0BYGRLRS1

Emporia Energy Monitoring Smart Plug, 4-Pack

Check price on Amazon

The Emporia plug comes from a company known for home energy monitoring, and this four-pack pairs energy readings with timers and scheduling in its mobile app. It works with Alexa and Google Home and connects over 2.4GHz Wi-Fi only. For a reader who wants to audit several rooms, the four-pack format and the energy-focused app make it a practical whole-home sweep tool.

The rating needs stating plainly: this plug is rated 10A continuous and 15A peak. Emporia’s own listing guidance warns that space heaters and portable air conditioners can exceed its limits, so those high-draw appliances belong on a plug rated 15A continuous instead, such as the Kasa KP125M or the Govee below. For televisions, consoles, chargers, and office gear, the continuous rating is comfortable headroom.

Spec Detail
Function Energy monitoring smart plug with timer and scheduling
Rating 10A continuous, 15A peak
Platforms Alexa, Google Home
Wi-Fi 2.4GHz Wi-Fi only
Model EMSO1-4
Pack size 4 pack
ASIN B0CLVRZ2QL

Govee Smart Plug with Energy Monitoring, H5086, 4-Pack

Check price on Amazon

The Govee H5086 is a 15A energy-monitoring plug sold as a four-pack, with Wi-Fi and Bluetooth connection, timer and group control, and no hub required. It works with Alexa and Google Assistant and carries ETL and FCC certification. Group control is handy for standby duty: an entertainment stack of a television, soundbar, and console can sit behind grouped plugs and shut down together on one schedule.

Its energy history lives in the Govee Home app, where the listing states daily, weekly, and monthly history is kept for up to one year. That longer record suits the measure-first method, since a device can be watched across normal weeks rather than judged on a single day. Connection is 2.4 GHz Wi-Fi only, with no 5 GHz support, which is the one setup detail to confirm against the home router before ordering.

Spec Detail
Function Smart plug with energy monitoring
Rating 15A
Platforms Alexa, Google Assistant
Energy data Daily, weekly, and monthly history in the Govee Home app, up to 1 year per the listing
Connection Wi-Fi and Bluetooth, 2.4 GHz Wi-Fi only, no hub required
Certification ETL and FCC Certified
Model H5086
Pack size 4 pack
ASIN B0CKM8CF7N

Amazon Smart Plug, Works with Alexa

Check price on Amazon

The Amazon Smart Plug is the honest contrast in this group: it has no energy monitoring at all. It offers scheduling, timers, and Alexa routines, with Alexa-only control, and nothing more. That is a genuine limitation for the measure-first method, because this plug can never show what a device draws at rest.

It still earns its place for one specific job: loads whose standby draw is already known. If a monitoring plug has already shown that a particular charger, lamp timer, or media box wastes power on a predictable pattern, a scheduling-only plug can run the cutoff routine without paying for a second measuring device. Presented that way, it is a reasonable finishing tool. Presented as a way to find standby waste, it would be the wrong buy, and this guide does not present it that way.

Spec Detail
Function Scheduling smart plug, no energy monitoring
Control Alexa only
Features Scheduling, timers, Alexa routines
Energy monitoring None
Load rating Not stated
ASIN B089DR29T6

How to choose

Decide first whether the plug needs to measure or only to switch. Monitoring plugs answer the question that starts the whole project: what does this device actually draw at rest? Scheduling-only plugs are cheaper tools for loads already measured. Buying scheduling-only plugs first means guessing, and guessing usually means switching off devices that drew almost nothing while missing the real standby loads.

Next, check where the energy data lives. The Kasa EP25 and Govee readings sit in their brand apps, and the KP125M shows its readings in the Kasa or Tapo app while its Matter energy reporting varies by platform. A buyer who wants readings inside a particular smart-home app should confirm that platform shows energy data for the specific plug, not just on/off control.

Then respect the load ratings. Continuous rating is the number that matters for anything left running for hours. The Emporia is rated 10A continuous, so space heaters and portable air conditioners should be steered to the 15A plugs, and every plug here should stay within its stated rating with the appliance maker’s guidance followed.

Finally, confirm the Wi-Fi band. Every plug in this guide connects on 2.4 GHz only. Most routers broadcast that band, but a router set to 5 GHz only, or a weak 2.4 GHz signal at a distant outlet, will cause setup trouble that has nothing to do with the plug itself.

Who should skip

Skip smart plugs if the target devices already sit on a switched power strip that gets turned off nightly, since the standby problem is already solved there. Skip them for devices that should never lose power, such as medical equipment, security systems, refrigerators, or a DVR set to record overnight. Skip the monitoring models if the only goal is a simple lamp timer, where a scheduling plug or a basic timer does the job. And skip this whole product group if the aim is whole-home energy tracking, which is a panel-level monitor’s job rather than a plug’s.

FAQ

What is standby power?

Standby power is the electricity a device draws while it appears to be off or idle: televisions waiting for a remote signal, consoles in rest mode, chargers left plugged in, and printers waiting for a job. A monitoring plug measures that draw at the outlet so the waste can be identified device by device instead of guessed at.

Will cutting power completely cause problems for some devices?

It can for a few. Devices that run overnight updates, scheduled recordings, or maintenance cycles may misbehave if their power is cut on a schedule, and some inkjet printers run cleaning cycles when power returns. Check the appliance maker’s guidance, and use scheduling only on devices that tolerate a full cutoff.

Do all smart-home apps show the energy readings from these plugs?

No. Readings generally live in the brand app, such as the Kasa, Tapo, Emporia, or Govee Home app. With the Matter-compatible KP125M, energy reporting is platform-dependent, and TP-Link’s own ecosystem information marks Apple Home as on/off control only. Confirm the chosen platform displays energy data before relying on it.

Can a smart plug run a space heater or portable air conditioner?

Only within its continuous rating, and with the appliance maker’s guidance followed. The Emporia plug is rated 10A continuous and its listing guidance warns that heaters and portable air conditioners can exceed its limits. High-draw appliances belong on a plug rated 15A continuous, and many heater makers advise against smart plugs entirely, so check first.

Final verdict

The measure-first method decides the ranking. The Kasa EP25 four-pack is the easiest way to audit several devices, the KP125M suits mixed smart-home platforms and heavier loads with its 15A rating, the Emporia four-pack fits readers who want an energy-focused app while respecting its 10A continuous limit, and the Govee four-pack adds group control and a long energy history. The Amazon Smart Plug closes the list as the scheduling-only finisher for loads already measured. Measure first, then switch off only what the readings justify.

T
The Pennsylvania Progressive Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Smart Plugs for Cutting Standby Power at…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.